backtopbacktopbacktop



 

Updates

uLaunchELF v4.42b

Open PS2 Loader v0.8

SMS Media Player v2.9 R4

Free McBoot 1.8b

ESR beta r9b

Open Ps2 Loader Guides & Tutorials

Free MCBOOT Guides & Tutorials

Wii Modchips

 

Chiip - CycloWiz - OpenWii - Wab ModCheap - Wiid - WiiFree - WiiKey - Wiinja - WiiSKAS - Yaosm

 

Miscellaneous Description
IC Prog v105D PIC Programmer
PonyProg2000 Serial device programmer
Simple Programmer 1

Easy to make! Should work with 12F629, 12F675 and 12F683.

Trouble shooting notes:
- If you sure the connectivity is perfect, please try to plug
your programmer into a Desktop PC (or different desktop) instead of a Laptop.
- Beware the orientation (front or soldier side) of RS-232 Connector
- Prolonged heat to BS170/IRF510 will kill it permanently

Simple Programmer 2

Easy to make! Should work with 12F629, 12F675 and 12F683.

 

Wiid Description
Wiid Update v0.2 USA

USA
- Adds Region Free capability to your WII
- Corrects any issues with "GCOS SELFBOOT MULTIVER" v2 and v3 and audio streaming games

Wiid Update v0.2 PAL

PAL
- Adds Region Free capability to your WII
- Corrects any issues with "GCOS SELFBOOT MULTIVER" v2 and v3 and audio streaming games

Wiid Update v0.2 JAP JAP
- Adds Region Free capability to your WII
- Corrects any issues with "GCOS SELFBOOT MULTIVER" v2 and v3 and audio streaming games

 

Wiid Update v0.1

USA - This Firmware will add Region Free capability to your WII!

Wiid Update v0.1

PAL - This Firmware will add Region Free capability to your WII!

Wiid Update v0.1

JAP - This Firmware will add Region Free capability to your WII!

Install Diagram

Features -

- Non Swap/Direct Boot for Wii back-ups
- Non Swap/Direct Boot for GC back-ups
- Non Swap/Direct Boot for Homebrew in GC mode
- Non Swap/Direct Boot for NTSC region Wii games/back-ups on US and JAP consoles
- Boots PAL Back-ups/Originals on NTSC WII consoles (partially without swapping)
- Boots NTSC Back-ups/Originals on PAL WII consoles (partially without swapping)
- Boots different region GC Games Original/Back-up Imports (partially without swapping)
- EUROPE/USA/JAPAN Wii Console Support
- Double soldering option, 6 wires or Quicksolder (No wires required!)
- Compatible with all the Wii Console Versions/Drive currently available
- Full D2B Drive Support
- Built-in audio fix
- Full support for DVD-R/DVD+R and DVD+RW/DVD-RW without Booktype
- Supports Multi-Disc/Multi-games for BOTH Wii and GameCube
- Recovery Mode for incomplete/Bad Upgrades
- Stealth mode
- Firmware fully Upgradable via DVD!

 

WiiKey Description
Installation manual v1.0  
WiiKey Utilities v1.1 Patch Windows GUI version of the Wiikey Utilities - Patch
WiiKey Utilities v1.0 Windows GUI version of the Wiikey Utilities
   
WiiKey Update v1.9b audiofix fixed o_0 dual layer support (no bitsetting required) improved media support (all supported chipsets) full Gamecube regionfree (no-swap/video setup) various "smaller" improvements/fixes workaround for FW 3.0 gameid limitation (existing wkb 1.2 discs will boot again) "on the fly" settings for gc games (by holding buttons) toggle audiofix, diskspeed, force NTSC/PAL
   
Setup disc v1.3 (USA)

Firstly, you WILL need access to a GameCube controller to get this working as it uses GCOS to load the disc. You only need the controller for a minute - just long enough to turn on the region override.

Setup disc v1.3 (PAL)

 

Setup disc v1.3 (JAP)

 

Setup disc v1.2 (Universal PAL/USA/JAP)

wiiKey base combines various applications into a single bootable
disc. This release includes:

- wiikey configuration
- wiikey dvdDump (dumps discs to sdcard)
- some of the most popular gamecube homebrew apps:

- SDLoad 1.0 by Costis
- Snes9x 1.43 GX 0.5 Port by Softdev
- GCOs MultiGame Version by emu_kidid
- MFE Distro 1.0 by Isobel

We like to point out that this disc does not update the chips firmware
in any way. It merely adjusts the configuration stored in EEPROM.

Setup disc v1.1 US NTSC No GC joypad required, toggle settings with reset
Setup disc v1.1 PAL No GC joypad required, toggle settings with reset
Setup disc v1.1 JAPAN NTSC No GC joypad required, toggle settings with reset
Setup disc v1.0 US NTSC Requires GC joypad
Setup disc v1.0 US NTSC No GC joypad required
Setup disc v1.0 PAL Requires GC joypad
Setup disc v1.0 PAL No GC joypad required
Setup disc v1.0 JAPAN NTSC Requires GC joypad
Setup disc v1.0 JAPAN NTSC No GC joypad required

 

CycloWiz Description
CycloWiz Upgrade 3.0 NTSC-USA consoles (for DMS/D2A)
CycloWiz Upgrade 3.0 NTSC-JAP consoles (for DMS/D2A)
CycloWiz Upgrade 3.0 PAL consoles (for DMS/D2A)
   
GCOS CycloWiz Edition GC imports and Multi Game discs
GCOS CycloWiz Edition source code  

 

Wiinja Description
Wiinja v1 Hexcode  
Wiinja v2 Hexcode  

 

Wiinja Description
Wiinja Deluxe Upgrade ISO Enabler Region
WIINJA Deluxe Upgrade v2 ISO Added Old Viper Gamecube Multigame Discs Compatibility
WIINJA DELUXE NinjaShell Adapted Version PAL ISO Runs Old Viper Gamecube Multigame Discs
WIINJA DELUXE Fast User Guide ENGLISH
WIINJA DELUXE Fast User Guide ESPAÑOL
Wiinja Tested medias TDK DVD-R --> 16x -- PERFECT
XTRA DVD-R -> 8x -- PERFECT
IMATION DVD-R --> 16x -- PERFECT
VERBATIM DVD-R --> 16x -- PERFECT
VERBATIM DVD+R --> 4x -- PERFECT (Burn it DVD-ROM BOOTYPE)
EMTEC DVD-R -->> 4x -- Produces DRE on WII and Gamecube Modes
PLEOMAX DVD-R --> 16x -- PERFECT
PRINCO DVD-R -- > 4x -- Not Good Perfomance
GCOS Wiinja Pal GCOS for the Wiinja (PAL)
GCOS Wiinja Usa

GCOS for the Wiinja (NTSC)

GCOS Special Version for Wiinja Modchip.

What's it do?:
Boots all region Gamecube games (original or legal backups)
Explore ISO9660 discs up to 4.7gb(?) and launch DOL/ELF

How to:
Insert this disc into your Wiinja'd Wii and boot it.
Eject it and put in your favourite GC game and boot!

 

Chiip Description
Chiip Firmware v0.9.1

Atmega8

- No bitsetting required
- This means that more or less all DVD+R/+RW/-RW discs should work now
- The "reduce DVD speed by quitting and restarting a game"-trick was removed from this version; I will soon add a - different way of setting the speed
- Might improve support for different region originals
- Again changed the login process a little
- The Linux and Wiip-AT90S2313 versions were removed from this release as it's only a test release anyway

Chiip Firmware v1.0 beta 7

Atmega8

- Runs Wii and Gamecube Originals
- Runs Wii and Gamecube Backups from the same region
- Runs Gamecube homebrew
- Probably works with different region software using swap trick
- Runs DVD+R / DVD-R / DVD+RW (and probably DVD-RW too)
- Runs DMS / D2A / D2B chipsets
- Runs on both ATmega8L-8 and ATmega8-16 on 3.3V supply
- Fixes some bugs for D2B users and is mainly a test version for D2B.

Chiip Firmware v1.0 beta 6

Atmega8

Chiip Firmware v1.0 beta 5

Atmega8

- Runs Wii and Gamecube Originals
- Runs Wii and Gamecube Backups from the same region
- Runs Gamecube homebrew
- Probably works with different region software using swap trick
- Runs DVD+R / DVD-R / DVD+RW (and probably DVD-RW too)
- Runs DMS / D2A / D2B chipsets
- Runs on both ATmega8L-8 and ATmega8-16 on 3.3V supply
AVRDude Chiip Firmware v1.0 beta 4 Atmega8
Chiip Firmware v1.0 beta 4 Atmega8
Chiip Firmware v1.0 beta 2 Atmega8
Chiip Firmware v1.0 beta 1 Atmega8

 

WiiFree Description

WiiFree 2.51b

2.51 - 2.51b : Updated installation schematic. All binaries/sources remain the same. 16F628A confirmed to work.

WiiFree 2.51

2.50 - 2.51 : Added bunch of features for the LCD screen: -Shows chipset (D2A,D2B) -Shows region (JAP,USA,EUR,OFF,N/A) -Shows drivespeed (2x,4x,6x) -Shows chip activity -Setting region @ first succesful boot -Checking original/backup -Patching backups -Idle -Bad connection (soldering job) check... hehehe Also updated schematics, now using USB 5v point, and LCD support for 16F628A (compiles, unable to test, should be ok, let us know). We used a 2x16 LCD as basis for the lcd messages, as it's the most common size. More and longer lines are easily implemented, so give a shout on the forums if you'd be interested in that. Also we don't have every LCD in the world so give us your input if something is up, should work though, first make sure you didnt fuck up yourself. 12F6xx code remains the same.

WiiFree 2.45

12F629, 16F628, 12F675 and 12F683

- Added a manual.txt on how to use WiiFree. Only patching the maxdiscsize if it wasn't recognized by the drive now (which could
result in better dectection of media in some cases). Official support for 16F628(A), now the LEDs are working on the proper pins.
Added compiler_constants library, so you should be able to compile WiiFree yourself now.

WiiFree 2.44a

12F629, 16F628, 12F675 and 12F683

- Fixed a tiny bug in the media compatibility.
- Made the disc patching more generic, which seems to solve some problems people experience. Fixed the lack of sleep.

WiiFree 2.43c

12F629, 16F628, 12F675 and 12F683

- Updated the installation schematic for the 16F628. The code/hex is the same as 2.43a. Added a tool to fix gamecube audiostreaming.
- Lack of sleep bug.
- Fixed a bug where in some cases after leaving the Wii off for an extended period of time, the region patching gave problems.

WiiFree 2.42a

12F629, 16F628, 12F675 and 12F683

- Fixed 16F628 support (please test, because we don't have a 16F628). For 12F629, 12F675 and 12F683 nothing changed.
- We did have to do some reinserts again with our different region games. So this is another attempt to 100%.
- The status LED now only toggles after successfull patching.

WiiFree 2.41

12F629, 12F675 and 12F683

- Again we improved the region patching for Wii games, hopefully no more reinserts. (because we want it 100% right instead of 99%)

WiiFree 2.40

12F629, 12F675 and 12F683

- Blinking LEDs after successfull configuration. More robust detection of autoregion. Made the code better readable and documented.

WiiFree 2.39a

12F629, 12F675 and 12F683

- Sometimes the region could be automatically set to the region of an import game if that was the first one inserted. Now it will
only set the region to the region of a game that starts succesfully.
- Added fast blinking leds for 12F683 when the region is
patched. Autoregion patching does not work when the disc is already in the drive when the Wii is powered on.
- Better automatic detection of region (and a way out if it goes wrong). Even if the region is set wrong the !!NEW!! ConfigDVD will always boot, so you can reset the region. Better region patching for GC discs.
- Fixed bug where you couldn't set the speed anymore with the config dvd. Better automatic detection of region.
- Fixed a bug in GC/Wii disc detection
- Automatic detection and setting of region, the first time a Wii game from the Wii's region is used.
- Disabling the region patch from the config DVD, disables the region patch AND the automatic configuration of the region.
- Partial regionfree support for GameCube games (both originals and backups).

WiiFree 2.37

12F629, 12F675 and 12F683

- Original Wii import support.
- Using speedfix method used in 2.34a instead of the one in 2.33a, it works better on our consoles.
- Created a version with experimental GameCube regionfree (thnx to Bell). And changed the region patching to only 2 bytes per region
We need your feedback!!

WiiFree 2.33a

12F629, 12F675 and 12F683

- Reduced the size of the code by 20% and changed the moment of the speedfix.

WiiFree 2.32

12F629, 12F675 and 12F683

- Again changed the patching routine. Better timing for region patch... Almost full 12F629. Updated the Readme. Made more friends :-)

WiiFree 2.31

12F629, 12F675 and 12F683

- Changed the patching of backups. Faster/better detection/starting of backups. No more strange noises coming from the drive.
- Some code optimisations

WiiFree 2.30 Test 1

12F629, 12F675 and 12F683

- Feel free to alter the code to something that works fine on your Wii, and post the results.

WiiFree 2.29 Test 1

12F629, 12F675 and 12F683

- Feel free to alter the code to something that works fine on your Wii, and post the results.

WiiFree 2.28

12F629, 12F675 and 12F683

- Just experimented with the code.
- We think we improved the region patching. Please tell us if it is really better or not!!

WiiFree 2.26

12F629, 12F675 and 12F683

- Run gamecube originals
- Run gamecube backups
- Run Wii originals
- Run Wii backups
- Run Wii games from different regions!!
- Support for DMS, D2A and D2B!!
- Speedfix
- Support for alle media: DVD+R, DVD+RW, DVD-R, DVD-RW
- Configuration DVD for setting up your region
- Support for 12F629, 12F675 and 12F683 chips (the installation for the 12F683 is the same as the 12F629)

- Optimized code, some stuff might work better. Configurable region and speedsettings with the NEW config dvd. You might experience flickering of the config menu, sorry but we didn't feel like fixing that at the moment. You can set the region and speed in
the hex file by changing the DATA EEprom byte 0 and 1.

Byte 0 is the region: 0 for JAP, 1 for USA, 2 for EUR, FF for none.
Byte 1 is te speedsetting: 0 for low, 1 for medium, FF for max

WiiFree 2.26

16F628 and 16F628A

WiiFree 2.25

12F629 and 12F675

- Cleaned the code. Removed a loop which could influence the region patching. Improved region patching
- Safety SpeedFix
- 3 IF estructures converted to ElseIF estructures.

WiiFree 2.24

12F629,12F675 and 12F683

- Fixed minor bug with infinite loop

WiiFree 2.23  
WiiFree 2.22 Improved detection mechanism
WiiFree 2.21 Fixed bug where originals were not detected in some cases
WiiFree 2.20

12F629, 12F675 and 12F683

- Run gamecube originals
- Run gamecube backups
- Run Wii originals
- Run Wii backups
- Run Wii games from different regions!!
- Support for DMS, D2A and D2B!!
- Speedfix
- Support for alle media: DVD+R, DVD+RW, DVD-R, DVD-RW
- Configuration DVD for setting up your region
- Support for 12F629, 12F675 and 12F683 chips

- Full drive speed support. All media support (DVD+R, DVD+RW, DVD-R, DVD-RW).
WiiFree 2.0 Beta 5

12F629, 12F675 and 12F683

- Fixed big BUG!! Thank you all for testing and suggesting improvements.
- Fixed original Wii games not playing. Fixed some gc games not playing.
- Better detection of backup discs, due to updated patching method. If none of your discs is working, you've got the regionsettings wrong.
- Added Multiregion support for Wii games. Use the configuration DVD to set your region. Or use one of the supplied hexes..
WiiFree 1.51 Source

12F629, 12F675 and 12F683

Updated the code, added comments. Better detection of backup disc insert. Cleaner drive detection and alternate LED blink when error.
WiiFree 1.23 Source

Updated the code, functionality is the same.

WiiFree 1.23 12F675

Updated the code, functionality is the same.

WiiFree 1.22 Source

PIC12F683 and PIC12F675

WiiFree 1.22

PIC12F629 and PIC12F683

WiiFree 1.22 12F675

PIC12F675

WiiFree 1.21

PIC12F629 and PIC12F683

- Run gamecube originals
- Run Wii originals
- Run Wii backups
- Support for DMS, D2A and D2B!!
- Support for 12F629 and 12F683 chips (the installation for the 12F683 is the same as the 12F629)

WiiFree 1.2

PIC12F629 and PIC12F683

WiiFree 1.01

This free PIC12F629 hex supports D2A, DMS and D2B version Wii's currently and is custom code based on AloneTrio/WAB's previous releases. 1.0 to 1.01 Install Fix.

- Run Wii backups

Jal_Libraries

How to compile WiiFree yourself!!

1. Download and install JalV2. You can download it HERE 2. Download the extra Jal Libraries and extract them to: <JAL directory>\Libraries 3. Download the JALV21 update and install it 4. Start JALEdit and open the .jal file 5. Experiment with the code/make changes 6. Press F9 to compile the jal file to .hex 7. If you made usefull changes, post them on the forum

 

Yaosm Description

Yaosm 2.0 rc3

Yaosm 1.9

- Supports DMS/D2A/D2B chipsets - Wii originals - Wii original imports* - Wii backups - Wii backup imports* - Gamecube originals - Gamecube original imports** - Gamecube backups - Gamecube backup imports** - Gamecube homebrew - All medias (DVD-R, DVD-RW, DVD+R, DVD+RW) - Dual Layer support - Fully configurable speed setting - Automatic region detection - Stealth (well, at least as much "stealth" as any other Wii modchip currently available) - "Safe" Configuration disc - Optional status LED - Optional disable switch (solder wire to reset switch) - GameID overriding for some GameID's that was blocked by firmware 3.0 - Support for Super Mario Galaxy backups

12F629/12F675 12F635 12F683 16F627/16F627A/16F628/16F628A/16F648A 16F630/16F676 16F636/16F639 16F684 16F87/16F88

Yaosm 1.5

Code Updates-
- Optimized code and silent mode
- Fixed Bugs in 1.4

Yaosm 1.3

Code Updates-
- Alternative speedsetting and support for more orginal GC imports

Yaosm 1.2

Code Updates-
- Gamecube original imports

Yaosm 1.1


*Partial support, see http://wiki.gbatemp.net/index.php/Wii_Region_Patcher_Compatibility_List for more info.
**Partial support, for full support use GCOS.

Yaosm 1.0

Yet Another OpenSource Modchip v1.0

Yaosm Config Disc USA

Configuration discs for yaosm 1.6/1.7

To configure yaosm, just boot with the correct disc for your region, choose Boot DVD in GCOS and then start yaosm_config.dol. You'll figure out the rest.

Yaosm Config Disc EUR

Configuration discs for yaosm 1.6 - 1.7

Yaosm Config Disc JAP

Configuration discs for yaosm 1.6 - 1.7

Yaosm Config Disc 2 USA

Configuration discs for yaosm 1.9 - 2.0rc3

Yaosm Config Disc 2 EUR

Configuration discs for yaosm 1.9 - 2.0rc3

Yaosm Config Disc 2 JAP

Configuration discs for yaosm 1.9 - 2.0rc3

 

 

WiiSKAS Description
WiiSKAS_Fusebit_Settings

 

WiiSKAS Beta 1c

Atmega8 or Atmega88 or PIC12F629 or PIC12F675

All WiiSKAS are the same at this time, just programable to different chips

WiiSKAS Beta 1b

Atmega8 or Atmega88 or PIC12F629

All WiiSKAS are the same at this time, just programable to different chips

WiiSKAS Beta 1

Atmega8 or Atmega88

All WiiSKAS are the same at this time, just programable to different chips

WiiSKAS Disasembled Source code Cource code for those who want to port it to another type of chip.

 

OpenWii Description
OpenWii 1.3 Full Source Alpha PIC Release

- Runs Wii and GC Orig games booting
- Proper Speed Fix
- DVD-+R and DVD-+RW
- Wii Dvd-R / Dvd+r(Bitset/booktype required) 100%
- GC backups and GC homebrew

OpenWii 1.3 Full Source Release

- Runs Wii and GC Orig games booting
- Proper Speed Fix
- DVD-+R and DVD-+RW
- Wii Dvd-R / Dvd+r(Bitset/booktype required) 100%
- GC backups and GC homebrew

OpenWii 1.3 PIC 16F628a

PIC16F628a

- Runs Wii and GC Orig games booting
- Proper Speed Fix
- DVD-+R and DVD-+RW
- Wii Dvd-R / Dvd+r(Bitset/booktype required) 100%
- GC backups and GC homebrew

OpenWii 1.3 AVR

ATs902313

- Runs Wii and GC Orig games booting
- Proper Speed Fix
- DVD-+R and DVD-+RW
- Wii Dvd-R / Dvd+r(Bitset/booktype required) 100%
- GC backups and GC homebrew

OpenWii 1.3 Chiip

ATmega8L8

- Runs Wii and GC Orig games booting
- Proper Speed Fix
- DVD-+R and DVD-+RW
- Wii Dvd-R / Dvd+r(Bitset/booktype required) 100%
- GC backups and GC homebrew

OpenWii 1.2

ATs902313 and ATmega8L8

- Runs Wii and GC Orig games booting
- Speed Fix
- Wii Dvd-R / Dvd+r(Bitset/booktype required) 100%
- GC backups and GC homebrew

OpenWii 1.1 PIC

PIC12F629 and PIC12F675

- Runs Wii and GC Orig games booting
- Wii Dvd-R / Dvd+r(Bitset/booktype required) 100%
- GC backups and GC homebrew

OpenWii 1.1 AVR Chiip

ATs902313 and ATmega8L8

- Runs Wii and GC Orig games booting
- Wii Dvd-R / Dvd+r(Bitset/booktype required) 100%
- GC backups and GC homebrew

OpenWii AVR 1.0

ATs902313

- Wii/Gc orig games booting
- Wii Dvd-R / Dvd+r(Bitset/booktype required) 100%

OpenWii Chiip 1.0

ATmega8L8

- Wii/Gc orig games booting
- Wii Dvd-R / Dvd+r(Bitset/booktype required) 100%

OpenWii Atmega Beta1

 

OpenWii SRC 1.0

 

Avr - Wiring Schematic

 

 

Wab ModCheap Description
Wab ModCheap 3.0

Final

Wab ModCheap 2.5

Cable Mod

Wab ModCheap 2.2

Cable Mod

Wab ModCheap 2.1

Cable Mod

 




Untitled Document
Powered by vBadvanced CMPS v3.2.3

All times are GMT -7. The time now is 04:35 PM.
Powered by vBulletin Version 3.8.5
Copyright 2000 - 2011, Jelsoft Enterprises Ltd.


Valid CSS!

backtopbacktopbacktop

Applications - Forums - List - Skins - Arcade

Disclaimer - FAQ - Donate

Page generated in 0.15384 seconds.
Copyright © 2004 - 2017 SKSApps.com
All rights reserved.
No affiliation with Sony Computer Entertainment or Nintendo Company, Ltd.